Sharp AR-M550N Скачать руководство пользователя страница 151

Страница: 151 / 460

: Feb. 6 2004

AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 96

a-3. Mirror

a-4. Lens

a-5. Reflector

1) Remove the table glass. (See “a-1. Table glass” in this section)

2) Move the lamp unit.

3) Clean mirrors 2 and 3.

5) Remove the lens cover.

6) Cary out cleaning of the lens and CCD.

7) Cary out cleaning of the reflector.

a-6. Scanner dry heater

1) Remove the table glass. (See “a-1. Table glass” in this section)

4) Remove the harness clamp and the dark box.

NOTE: When attaching the dark box cover, check to insure that the

blade spring is in the original position.

2) Shift the lamp unit, and remove the dark box. (See “a-3. Mirror” in

this section)

3) Remove the dark box and remove the harness clamp, and remove

the scanner dry heater.

Содержание AR-M550N













































































































































































































































































































































































































































































Результаты поиска

Содержание AR-M550N

Отзывы:

Sharp AR-M550N, Руководство по обслуживанию, Страница: 151 / 460

Результаты поиска

Содержание AR-M550N

Отзывы: