Sharp AR-M550N Скачать руководство пользователя страница 128

Страница: 128 / 460

AR-M550/M620/M700 DETAILS OF EACH SECTION 6 - 73

8) Remove the MG roller unit.

9) Remove the doctor attaching plate.

10) Remove the MG holders F and R.

a-4. Side Seals F and R

1) Take out the developing tank.

2) Remove the doctor cover.

3) Peel off the right and left side seals.

4) Clean the peeled area.

5) Peel off the new right and left seals from the mounting paper and

affix in the designated positions.

a-5. Toner concentration sensor

1) Remove the developing tank. (See “a. Developing unit” in this sec-

tion)

2) Remove the DV cover. (See “a-1. Developer” in this section)

3) Remove the toner concentration sensor.

Содержание AR-M550N













































































































































































































































































































































































































































































Результаты поиска

Содержание AR-M550N

Отзывы:

Sharp AR-M550N, Руководство по обслуживанию, Страница: 128 / 460

Результаты поиска

Содержание AR-M550N

Отзывы: