Sharp AR-M550N, Руководство по обслуживанию, Страница: 263 / 460

: Feb. 9 2004
1
AR-M550/M620/M700 SIMULATION 8 - 5
46 02 Copy exposure level adjustment (binary)
● ●
09 Copy exposure level adjustment/individual setting (Text binary)
● ●
10 Copy exposure level adjustment, individual setting (Text/Photo binary)
● ●
11 Copy exposure level adjustment, individual setting (Photo binary)
● ●
12 FAX exposure level adjustment (1 mode auto adjustment)
● ●
13 FAX exposure level adjustment, individual setting (Normal text)
● ●
14 FAX exposure level adjustment, individual setting (Fine)
● ●
15 FAX exposure level adjustment, individual setting (Super Fine)
● ●
16 FAX exposure level adjustment, individual setting (Ultra Fine)
● ●
17 Shading reference value change (Gain adjustment)
●
18
ϒ
change (Copier mode)
●
19 Exposure mode setting
●
20 OC/SPF exposure correction
●
21 Scanner exposure level adjustment (1 mode auto adjustment)
●
22 Scanner exposure level adjustment, individual setting (Normal text)
●
23 Scanner exposure level adjustment, individual setting (Fine)
●
24 Scanner exposure level adjustment, individual setting (Super Fine)
●
25 Scanner exposure level adjustment, individual setting (Ultra Fine)
●
27
ϒ
change (Scanner mode)
●
31 Copy sharpness setting
●
39 FAX sharpness setting
●
45 FAX exposure level adjustment, individual setting (600dpi)
● ●
48 01 Magnification ratio adjustment (by Input/Output)
● ●
05 Motor speed adjustment
●
50 01 Copy lead edge adjustment (Document table)
● ● ●
02 Lead edge adjustment (Document table simple type)
● ● ●
05 Print lead edge adjustment
● ●
06 Copy lead edge adjustment (SPF)
● ● ●
07 Copy lead edge adjustment (SPF simple type)
● ● ●
10 Print off-center adjustment
● ●
12 Document off-center adjustment
● ●
27 Document image loss setting (FAX send/scanner mode)
●
51 02 Resist amount adjustment
● ●
53 06 SPF size width detection level adjustment
●
07 SPF size width detection adjustment value input
●
08 SPF scan position adjustment
●
55 01 Engine soft SW change and check
●
02 Scanner soft SW change and check
●
03 Controller soft SW change and check
●
56 01 Data transfer
●
60 01 ICU image DRAM read/write check
●
61 01 LSU operation check
●
02 Laser power setting (Copier)
●
03 Laser power setting (FAX)
●
04 Laser power setting (Printer)
●
62 01 Hard disk format
●
02 Hard disk read/write check
●
03 Hard disk read/write check (All areas)
●
06 HDD self diag
●
07 Self diag error log print
●
08 Hard disk format (Excluding the system area)
●
10 Job complete list delete
●
11 Document filing data delete
●
63 01 Shading check
●
02 Shading execution
●
07 White plate scan start position adjustment
●
64 01 Self print
●
65 01 Touch panel adjustment
●
02 Touch panel check
●
Main
code Sub
code
Operation contents
Data save destination/Target
MFP Scanner Engine