Phason Supra-RS, Руководство пользователя

Страница: 57 / 152

Testing the configuration
21040012 57
3. To change the zone the element will be controlling, place the cursor on the Zone line and then
press
ENTER
. Press
+
or
–
to change the zone and then press
ENTER
.
4. Scroll to the Mode line and then press
ENTER
.
5. Press
+
or
–
until you see Timed Event and then press
ENTER
.
6. Scroll to the Name line and then press
ENTER
.
7. Enter the name (maximum 13 characters) for this relay. For more information, read
Entering
text in the Supra
on page 17. To save the name, press
ENTER
until the cursor returns to the
beginning of the line. To cancel the change, press
BACK
.
8. Repeat steps 2 to 9 for each timed event element you have connected to the Supra.
9. Press
BACK
to return to the Main Menu.
Testing the configuration
After configuring all the control elements (variable stages relays, and so on), test the Supra to make
sure the configuration is correct. In other words, make sure what you think is connected to a
particular relay or stage
is
actually connected to that relay or stage.
You can test the configuration by using the diagnostic feature of the Supra. The diagnostic feature
allows you to operate the equipment, regardless of temperature or time. As you operate each piece
of equipment, visually check to see if that equipment is doing what you tell it.
For example, when you switch on variable stage 1 at the Supra, does the fan or heater you think
have connected to that stage switch on? When you switch it off, does the fan or heater switch off?
For more information about the diagnostic test, read
Performing diagnostic tests
on page 105.
Zone
Mode
Tunnel option has no effect for timed events
Name
_Relay 1 Zone 1
Unassigned
Tunnel turn off? No
Name: Rly 01