Phason Supra-RS, Руководство пользователя

Страница: 61 / 152

Configuring optional features
21040012 61
3. Scroll to
Unassigned
and then press
ENTER
.
4. Press
+
or
–
to select the zone the sensor will be monitoring and then press
ENTER
.
5. Press
BACK
to return to the Main Menu.
Configuring the pulse counter
If you have a water meter connected to the Supra’s pulse counter terminal and will be monitoring
water usage, you need to tell the Supra how much water (in litres or US gallons) goes through the
meter for each pulse the meter puts out. The Supra uses this information to convert the pulses to
water usage values.
For example, let’s say your water meter puts out 1 pulse for every 10 gallons of water that goes
through it. If the Supra received 125 pulses from the meter during the day, you used 1250 gallons of
water.
Use the
Pulse counter worksheet
on page 128 when configuring a pulse counter.
To configure a pulse counter
1. From the Main Menu, select Settings (1).
2. From the Settings menu, select Water Meter .
The display should look like the following example.
3. Scroll to the second line and then press
ENTER
.
4. Enter the number of units (litres or gallons) for each pulse, or press
+
or
–
to adjust the number
and then press
ENTER
.
5. Press
+
or
–
to select litre or gallon / pulse and then press
ENTER
.
6. Scroll to the third line and then press
ENTER
.
Hum Zone Assignment
Unassigned
Water Meter
1Litre / pulse
Display in Litres