Chapter 4: Programming
74
Phason
Before programming the humidity compensation, you must assign the humidity
sensor to a zone. For more information, read
Humidity compensation settings worksheet
on page 134 when programming
the humidity compensation. The worksheet includes a table of values to use as a
guideline when programming.
To program the humidity compensation
1.
From the Main Menu, select
Maintenance
(2).
2.
From the Maintenance menu, select
Humidity Factor
.
The display should look like the following example.
3.
Press
ENTER
.
4.
Enter the humidity factor using the numbers on the keypad, or press
+
or
–
to adjust the value
and then press
ENTER
.
5.
Press
BACK
twice to return to the Main Menu.
6.
From the Main Menu, select
Settings
(1).
7.
From the Settings menu, select
Humidity Control
.
The display should look like the following example.
8.
Scroll to
Upper limit
and then press
ENTER
.
9.
Enter the upper limit using the numbers on the keypad, or press
+
or
–
to adjust the value and
then press
ENTER
.
10.
Scroll to
Lower limit
and then press
ENTER
.
11.
Enter the lower limit using the numbers on the keypad, or press
+
or
–
to adjust the value and
then press
ENTER
.
12.
Press
BACK
twice to return to the Main Menu.
Humidity Factor
5
Humidity Control
Zone 1
Upper limit 90%
Lower limit 30%
Содержание Supra-RS
Страница 1: ......
Страница 8: ...viii...
Страница 16: ...Chapter 1 Introduction 16 Phason Understanding the menu structure...
