Phason Supra-RS, Руководство пользователя

Страница: 35 / 152

Finishing the installation
21040012 35
To connect the incoming power source
1. Set the voltage select switch to the correct voltage setting.
2. Connect the incoming power source as shown below.
Finishing the installation
After installing and connecting equipment to the Supra, you are ready to finish the installation.
Before you start configuring the Supra, you need to verify the connections and close the Supra.
Verifying your connections
Make sure the configuration worksheets in
Appendix E
correspond to the way the equipment is
connected to the Supra.
It is very important that the connections and the worksheet are the same, because the next step after
closing the cover is to tell the Supra which equipment is connected to each terminal. It is important
so you can be sure you are controlling the equipment you think you are controlling.
Closing the cover
After you have finished connecting all equipment, wiring, and cables to the Supra, it is time to verify
the wires are connected properly and the close the cover.
1. Make sure all the wires are properly connected to the correct terminals.