Phason Supra-RS, Руководство пользователя

Страница: 105 / 152

Performing diagnostic tests
21040012 105
4. Scroll to the
Auto
line for the element to you want to override and then press
ENTER
.
5. Press
+
or
–
to adjust the setting of the stage. If you need to check equipment, go to the
equipment connected to the stage and check if it does what you expect (turns on or off, opens
or closes, extends or retracts, and so on.

If you press
ENTER
after adjusting the setting of the stage and then exit the
menu (by pressing
BACK
), the element stays at that setting until you return
to the menu and change it.

If you do not press
ENTER
after adjusting the setting, when you press
BACK
,
the setting returns to what it was before you changed it.
6.
Press
BACK
three times to return to the Main Menu.
To exit manual override
Exiting manual override means restoring the stage to “Auto”. When you restore a stage to auto, the
stage returns to its normal, programmed settings.
1. From the Main Menu, select Maintenance (2).
2. From the Maintenance menu, select Manual Override (1).
3. Scroll to the type of element you want to return to its normal settings and then press
ENTER
.
4. Scroll to the setting line (the one that has On , Off , or a percentage) for the element to you
want and then press
ENTER
.
5. Press
+
or
–
to return the setting to Auto and then press
ENTER
.
6. Press
BACK
three times to return to the Main Menu.
Performing diagnostic tests
The Supra has several built-in diagnostic tests. If you suspect the control is not responding as it
should, perform the tests.
If you contact Phason Customer Support (see the contact information in the front of the manual),
the technician might ask for some information displayed by the diagnostic tests.
Curtains
CURTAIN OVERRIDE
West curtains Auto
Open relay 5
Close relay 6
Actuators
ACTUATOR OVERRIDE
Roof inlets Auto
Open relay 3
Close relay 4