Phason Supra-RS, Руководство пользователя

Страница: 94 / 152

Chapter 4: Programming
94 Phason
To set up the status display
1. From the Main Menu, select Maintenance (2).
2. From the Maintenance menu, select Set Main Display (6).
The display should look like the following example.
The relays and variable stages are the names you entered when you configured them.
3. Refer to the
Status screen display worksheet
on page 144. Scroll to a line that needs changing
and then press
ENTER
.
4. Press
+
or
–
to change the setting and then press
ENTER
.
5. Repeat steps 3 and 4 for each item you want to change.
6. Press
BACK
twice to return to the Main Menu.
Setting up security and users
The Supra has a five-level PIN security system. Each level has access to different areas of the Supra.
When you first receive the Supra, security is not enabled. This means anyone can do anything with
the Supra. When you enable security, users must enter their PIN (personal identification number)
before they can access a specific menu or function.

Use the
Security levels worksheet
on page 145 when setting up security and
users. The worksheet contains information about the security levels and their
access.

Setting up and enabling security allows the Supra to log who acknowledges
alarms and makes changes to settings. It tracks this information using the PIN
each user enters when they access the control. For more information about
logging, see
Reading the audit log
on page 103.
If all security PINs have been forgotten and nobody can access the control, pressing

,
+
,

, and
–
as a PIN number and then answering Yes on the next screen will turn
off security and restore the factory settings.
Use this step only as a last resort. It
erases ALL your configuration and settings. You will have to reconfigure and reprogram
the Supra.
SET DISPLAY ITEMS
Zone Temps: 1
Temp Extremes Yes
N. Actuator No