Phason Supra-RS, Руководство пользователя

Страница: 60 / 152

Chapter 3: Configuration
60 Phason
3. Scroll to the second line and then press
ENTER
.
4. Enter the de-icing temperature using the numbers on the keypad, or press
+
or
–
to adjust the
value and then press
ENTER
.
The Supra interprets the last digit as a decimal. For example, to enter 35.0°F,
press 350.
5.
Scroll to the third line and then press
ENTER
.
6. Enter the de-icing duration (in seconds) or press
+
or
–
to adjust the value and then press
ENTER
.
7. Scroll to the next line.
8. To enable or disable de-icing for this variable stage, press
ENTER
and then press
+
or
–
to
switch between
Yes
(enable) and
No
(disable) for this variable stage.
9. Press
ENTER
.
10. Repeat steps 7 and 9 for each variable stage.
11. Press
BACK
twice to return to the Main Menu.
Selecting a humidity zone
If you installed a Relative Humidity Sensor, you need to select which zone the sensor will be
monitoring. A humidity sensor can monitor only one zone. For more information, read
Relative
Humidity Sensors
on page 13.
Use the
Humidity zone worksheet
on page 127 when configuring humidity.
To select a humidity zone
1. From the Main Menu, select Configuration (5).
2. Press
Up
until you see Hum Zone Assignment .
The display should look like the following example.
De-ice VAR fans when
Colder than 33.0°F
For 3 seconds
VS Fan 1
No