Chapter 4: Programming
78
Phason
Variable stage settings worksheet
on page 133 when setting up variable
stages.
To program variable stages
1.
From the Main Menu, select
Settings
(1).
2.
From the Settings menu, select
Variable Stages
(3).
The display should look like the following example.
The first line is the name you gave the variable stage when you configured it. To program one of
the other variable stages, scroll down until the name is on the top line.
3.
Scroll to
Idle Speed
(
Min Heat
for a heating stage) and then press
ENTER
.
4.
Enter the speed (output for a heating stage) using the numbers on the keypad, or press
+
or
–
to
adjust the percentage and then press
ENTER
.
5.
Scroll to
Off
at
(
On Full at
for a heating stage) and then press
ENTER
.
6.
Enter the temperature using the numbers on the keypad, or press
+
or
–
to adjust the value and
then press
ENTER
.
The Supra interprets the last digit as a decimal. For example, to enter 80.5°F,
press 805.
7.
Idle at
and
On Full at
(
Setpoint
and
Off at
for a heating stage).
8.
Press
BACK
twice to return to the Main Menu.
Programming actuator relays
Before programming the actuator relays, make sure you have properly configured the relays and
calibrated the actuators. For more information, read
Configuring relays for actuators
and
Cool mode
Heat mode
VS Fan 1
Zone 2
On Full at
85.0°F
Idle at
80.0°F
Off at
40.0°F
Heat Mat 4
Zone 2
Off at
86.5°F
Setpoint
85.0°F
On full at
80.0°F
Содержание Supra-RS
Страница 1: ......
Страница 8: ...viii...
Страница 16: ...Chapter 1 Introduction 16 Phason Understanding the menu structure...
