Phason Supra-RS, Руководство пользователя

Страница: 83 / 152

Programming the stages
21040012 83
To program curtains
1. From the Main Menu, select Settings (1).
2. From the Settings menu, select Curtains (5).
The display should look like the following example.
The first line is the name you gave the open relay for the curtain when you configured it. Only
curtains that have been configured appear in the display. To program other curtains, scroll down
until the name is on the top line.
3. Scroll to Setpoint and then press
ENTER
.
4. Enter the temperature using the numbers on the keypad, or press
+
or
–
to adjust the value and
then press
ENTER
.
The Supra interprets the last digit as a decimal. For example, to enter 80.0°F,
press 800.
5.
Scroll to Idle Band and then press
ENTER
.
6. Enter the temperature range using the numbers on the keypad, or press
+
or
–
to adjust the
value and then press
ENTER
.
7. Scroll to Open Run and then press
ENTER
.
8. Enter the duration using the numbers on the keypad, or press
+
or
–
to adjust the value and
then press
ENTER
.
9. Repeat steps 7 and 8 for open idle, close run, and close idle.
10. Press
BACK
twice to return to the Main Menu.
Programming heating and cooling elements and temperature-
based duty cycles
Heating and cooling elements control the temperature by switching single-stage heating equipment
such as electric heaters, or cooling equipment such as misters ON or OFF. Before setting up the
elements, make sure you have properly configured the relays. For more information, read
Configuring relays for heating, cooling, or temperature-based duty cycles
on page 53.
Curtain 1 Zone 2
Setpoint
80.0°F
Idle Band 2.0°F