Phason Supra-RS, Руководство пользователя

Страница: 90 / 152

Chapter 4: Programming
90 Phason
4. Enter the ON duration using the numbers on the keypad, or press
+
or
–
to adjust the value and
then press
ENTER
.
The Supra interprets the last two digits as the number of seconds. For example, if
you want the relay on for 15 minutes, press 1500.
5.
Enter the OFF duration using the numbers on the keypad, or press
+
or
–
to adjust the value
and then press
ENTER
.
6. Scroll to
From
and press
ENTER
.
7. Enter the start time for the cycle, press
+
or
–
to select AM or PM , and then press
ENTER
.
When you enter the time, enter it in 12-hour format. For example, if you want 3:00
PM, press 0300 and then press
+
or
–
to change the AM to PM.
8.
Scroll to To and then press
ENTER
.
9. Enter the end time for the cycle, press
+
or
–
to select AM or PM , and then press
ENTER
.
10. Press
BACK
twice to return to the Main Menu.
Programming the alarm and display settings
After programming the variable and relay stages, you can move on to the alarm and display settings.

Alarms (below)

Status screen display (on page 93)
Programming alarm settings
The alarm settings for the Supra determine which alarm conditions are enabled, which are disabled,
and their settings. All these work together to determine how and when the alarm relay activates (in
other words, signals an alarm condition).
The alarm relay activates if an alarm condition (one that is enabled) is present for longer than the
minimum duration. Minimum duration prevents alarms from activating when the temperature rises
or drops for just a few seconds. Minimum duration can be between 0 and 10 minutes; setting it to 0
activates the alarm relay immediately after an alarm is detected.