Phason Supra-RS, Руководство пользователя

Страница: 41 / 152

Configuring the main control functions
21040012 41
Identifying the Supra
To identify a particular Supra, you need to give it a meaningful name, such as
West Barn
or
Finishing
Room
. This is even more important when you have several Supras networked together.
If you move the Supra, or change how you use the area controlled by the Supra, you might want to
change the name to something more descriptive.
Two additional pieces of information can be found on the Set Unit Name screen.
The version number tells you which version of firmware the Supra has. Phason constantly improves
and adds new features to their products. If there are new features available, you can upgrade the
Supra using firmware updater. For more information, read
Supra firmware updater
on page 12.
The address is a unique number generated for the Supra when it was manufactured. If you have a
network of Supras and use SupraWare, you will need to remember this number. For more
information, read the SupraWare user manual.
To give the Supra a name
1. From the Main Menu, select Maintenance (2).
2. From the Maintenance menu, select
Set Unit Name
(5).
The display should look like the following example.
3. Scroll to the second line and then press
ENTER
.
4. Enter the name (maximum 14 characters) for this Supra. For more information, read
Entering
text in the Supra
on page 17. To save the name, press
ENTER
until the cursor returns to the
beginning of the line. To cancel the change, press
BACK
.
5. Press
BACK
twice to return to the Main Menu.
Configuring the startup timer
The Supra’s startup timer allows you to delay the startup of each Supra’s loads when the controls
return from a power failure. Configuring the timer allows you to distribute the initial startup load the
backup generator must handle, allowing you to use a lower-capacity, more-economical generator.
You can configure the startup timer to delay starting the Supra’s loads from 0 to 59 seconds. For
example, say you have 4 Supras in your facility and you set the delays to 0, 10, 20, and 30 seconds.
SET UNIT NAME
Name: Phason Supra
Version: 2.00
Address: 50B61AC8