Phason Supra-RS, Руководство пользователя

Страница: 72 / 152

Chapter 4: Programming
72 Phason
Example 2
Example 2 shows how you can use the two setback
groups (
A
and
B
) to have two different setback values for
different zones.
The setback for zones 1 and 2 is 5.0°F between 6:00 AM
and 9:00 PM. If the
group set point
for zones 1 and 2 is
78.0°F:

From 6:00 AM to 9:00 PM, the
adjusted set point
for
zones 1 and 2 will be 73.0°F.

After 9:00 PM and before 6:00 AM, the
set point
would be the normal 78.0°F.
The setback for zones 3 and 4 is 8.0°F between 6:00 AM
and 6:00 PM. If the
group set point
for zones 3 and 4 is
80.0°F:

From 6:00 AM to 6:00 PM, the
adjusted set point
for zones 3 and 4 will be 72.0°F.

After 6:00 PM and before 6:00 AM, the
set point
would be the normal 80.0°F.
Use the
Temperature setback worksheet
on page 133 when programming
temperature setback.
To program the temperature setback
1. From the Main Menu, select Settings (1).
2. From the Settings menu, select Temp Setback .
The display should look like the following example; this is setback A. If you want to define
setback B, scroll down until you see
TEMP SETBACK B on the top line.
3. Scroll to Zone and then press
ENTER
.
4. Press
+
or
–
to select the zone(s) affected by the setback and then press
ENTER
.
5. Scroll to
Status
and then press
ENTER
.
6. Press
+
or
–
to toggle between Disabled and Enable and then press
ENTER
.
7. Scroll to
Setback
and then press
ENTER
.
TEMP SETBACK A
Zone: None
Status: Disabled
Setback: 5.0°F
TEMP SETBACK A
Zone: 1&2
Status: Enabled
Setback: 5.0°F
Start Time: 6:00 AM
Stop Time:
9:00 PM
TEMP SETBACK B
Zone: 3&4
Status: Enabled
Setback: 8.0°F
Start Time: 6:00 PM
Stop Time:
6:00 PM