Panasonic LP-GS Series, Руководство по установке и обслуживанию

Страница: 33 / 190

33
2-1 Installation Environment
Use this product in the following environments.
Item Installation environment conditions
Operating ambient temperature *1 0°C to +40°C
Operating ambient humidity *1 35 to 85%RH
Ambient temperature for storage *1 -10°C to +60°C *2
Vibration resistance Head (with/without current): Acceleration of 9.8 m/s
2
or below
Controller (without current): Acceleration of 9.8 m/s
2
or below
Pollution degree 2
Use location Indoor; at an altitude of 1000 m or below
*1 : No condensation or freezing shall be allowed.
*2 : If there is a gap between the stored temperature and operating temperature, make sure to have the product get used
to the operating ambient temperature gradually prior to use to prevent the dew condensation.
ワㄐㄕㄊ㄄ㄆ
• Do not install this product at a place where vibrations and shocks can be directly transmitted to it.
• Do not use this product at a place with oil mist.
• In case this product is used in a dusty environment, take measures to prevent dust from entering into the laser marker, e.g.
using a storage housing.
• When installing the laser marker in the storage housing, use a housing equipped with panel cooler or heat exchanger to
maintain the air-cooling performance of the laser marker according to the ambient temperature.
Panel cooler or
heat exchanger
Panel cooler or
heat exchanger
Storage housing image
• Remove any dust and smoke from the laser emission port and laser beam path using a dust collector. For effective dust
collection, put the suction port of the dust collector near the lasing position. In an environment where dust and smoke
that tend to attach to the lens surface, it is recommended to create a compression air flow to ensure thorough dust collection.
ABC
ABCD
AB
Compressed
air
Dust collector
Laser marker head
ME-LPGS-SM-8