Panasonic LP-GS Series, Руководство по установке и обслуживанию

Страница: 124 / 190

124
„
Details of TIMING IN signal
TIMING IN signal: Use
TIMING IN signal is used when the laser marker operation trigger and image checker/code reader operation trigger is input
separately, e.g. when the camera (code reader) field of view is away from the laser marker marking position.
For image checking before marking For image checking after marking
q w
TRIGGER IN TIMING IN
Camera etc.
Laser marker
q w
TRIGGER IN TIMING IN
Camera etc.
Laser marker
q
Start work location detection (initial operation)
q
Start marking (initial operation)
w
Start marking
w
Start image checking
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• To control the linkage operation by TIMING IN signal, input TIMING IN signal within 60 seconds after completion of the
initial operation.
• For input of TIMING IN signal, refer to “6-1-9 Timing chart” (P.130).
• Input TIMING IN signal by I/O control. Any communication command cannot input TIMING IN.
TIMING IN signal: Not use
TIMING IN signal is not necessary when the series of operations of the laser marker and the image checker/code reader by
one trigger, e.g. when the camera (code reader) field of view and the laser marker marking position are the same.
For image checking before marking For image checking after marking
q
TRIGGER IN
Camera etc.
Laser marker
q
TRIGGER IN
Camera etc.
Laser marker
q
Start work location detection and start marking
after completion of location detection
q
Start marking and after completion of marking,
start image checking
ME-LPGS-SM-8