Panasonic LP-GS Series, Руководство по установке и обслуживанию

Страница: 152 / 190

152
3.
Connect the laser marker and Laser Marker NAVI smart online, and select “Maintenance” from the
screen selection menu.
4.
Click the “Laser pumping ON/OFF” of the “Laser Marker
Operation” tool to pump laser.
5.
Click “Laser radiation for measurement” of the “Laser Marker
Operation” tool.
6.
Enter the laser power and other laser
settings, then click “Laser radiation”.
Click “Yes” in the laser radiation confirmation
dialog to irradiate the laser.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• For LP-GS051(-L) type, use “work distance” indication
of the guide laser to confirm the setting position of the
power meter detector.
Set the detector so that the cross indication is on the
center of the detector. (Do not set it to the position
where the dot indication emitted in oblique overlaps the
detector.)
• For stable measurement results, it is recommended to obtain the average output value by measuring the output after
about 30 seconds from the start of laser radiation for 10 to 30 seconds.
• The settings of laser radiation for measurement are common in all files.
WARNING
• Be sure to wear protective goggles.
• During the radiation, the laser energy is concentrated to one point. Use due
caution with long period radiation, it may cause a fire or damage to the object.
7.
Click “Stop” to stop laser radiation.
The laser radiation for measurement will automatically
stop after about one minute even without clicking
“Stop”.
ME-LPGS-SM-8