Panasonic LP-GS Series, Руководство по установке и обслуживанию

Страница: 156 / 190

156
4.
Remove the connector for the battery inside the
controller (coin-type).
Attach the connector to the new battery.
ワㄐㄕㄊ㄄ㄆ
• If you wish to dispose used batteries, please comply with its
regional regulation. For the correct method of disposal, please
contact your local municipality, waste disposal services, or the
point of sale where you purchased the batteries.
5.
Tighten the screws (two locations) on the cover panel of the battery inside the controller and install
the cover.
Tightening torque: 0.5 N·m
6.
Tighten the screws (six locations) on the side panel, and attach the panel.
Tightening torque: 0.5 N·m
ワㄐㄕㄊ㄄ㄆ
• Be careful not to let the inside cables get caught while installing.
7.
Connect the Laser Marker NAVI smart
online, and click “Operation/Information”
tab on the environment setting screen.
Click “Internal Clock Setting” to set the
date and time.
8.
Click “Set” on the lower right corner of the screen.
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• An alarm for system clock stop may be generated when the laser marker is started for the first time since the battery
replacement. To release the alarm, reset the date and time and click the confirmation button in the error dialog.
ME-LPGS-SM-8