Mitsubishi 2013 Outlander Скачать руководство пользователя страница 86

Страница: 86 / 602

Seat and restraint systems

2-59

WARNING

●

Do not attach anything to the steering wheel’s pad-

ded cover, such as trim material, badges, etc. These

could strike and injure an occupant if the airbag
inflates.

●

Do not set anything on, or attach anything to, the

instrument panel above the glove compartment.
Such items could strike and injure an occupant if the

airbag inflates.

WARNING

●

Do not attach accessories to, or put them in front of,

the windshield. They could restrict the airbag infla-

tion, or strike and injure an occupant, when the
airbag inflates.

●

Do not attach additional keys or accessories (hard,

pointed or heavy objects) to the ignition key. Such
objects could prevent the driver’s knee airbag from

inflating normally or could be propelled to cause

serious injury if the airbag inflates.

●

Do not attach accessories to the lower portion of the

driver’s side instrument panel. Such objects could

prevent the driver’s knee airbag from inflating nor-
mally or could be propelled to cause serious injury if

the airbag inflates.

BK0150700US.book 59

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 86 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: