Mitsubishi 2013 Outlander Скачать руководство пользователя страница 53

Страница: 53 / 602

2-26

Seat and restraint systems

Driver’s seat belt reminder/warning light and

display

N00418400342

Warning light

Warning display type 1

Warning display type 2

A tone and warning light are used to remind the driver to fasten

the seat belt.

If the ignition switch is turned to the “ON” position or the
operation mode is put in ON without the driver’s seat belt

being fastened, a warning light will come on and a tone will

sound for approximately 6 seconds to remind you to fasten
your seat belt.

If you then drive with the seat belt unfastened for longer than a

minute from when the ignition switch or the engine switch is
operated, the warning light will come on and blink repeatedly

and the tone will sound intermittently.

The warning light and the tone will stop after approximately 90
seconds.

If you then repeatedly stop and start your vehicle with the seat

belt unfastened, the warning light/display and tone will remind
you to fasten your seat belt every time the vehicle starts mov-

ing. You will also be reminded to fasten your seat belt in this

way when you remove your seat belt while driving. The warn-
ing light and the tone go off when the seat belt is fastened.

NOTE

●

At the same time, “FASTEN SEAT BELT” will be dis-

played on the information screen in the multi-information
display.

WARNING

●

In order to reduce the risk of serious injury or death
in an accident, always fasten your own seat belt. Do

not allow anyone to ride in your vehicle unless he or

she is also seated and fastening a seat belt. Children
should additionally be restrained in a secure child

restraint system.

BK0150700US.book 26

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 53 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: