Mitsubishi 2013 Outlander Скачать руководство пользователя страница 242

Страница: 242 / 602

Features and controls

3-145

Fuel tank filler door mark

The arrow (A) indicates that the fuel tank filler door is located

on the left side of the vehicle. (Refer to “Filling the fuel tank”
on page 1-4.)

Fuel remaining warning display

When the fuel level runs low, the information screen switches

to the interrupt display of the fuel remaining warning display
and the mark (B) on the fuel remaining display flashes. If the

warning display appears, refuel as soon as possible.

NOTE

●

On hills or curves, the display may be incorrect due to the

movement of fuel in the tank.

Service reminder

N00556700214

Displays the approximate time until the next recommended

periodic inspection. “---” is displayed when the inspection time

has arrived.

NOTE

●

The service reminder time can be modified by an autho-

rized Mitsubishi Motors dealer, to adjust for severe usage,

etc. Refer to “Severe maintenance schedule” in your vehi-
cle’s Warranty and Maintenance Manual. For further

information, please contact your authorized Mitsubishi

Motors dealer.

Type 1

Type 2

Type 1

Type 2

BK0150700US.book 145

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 242 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: