Mitsubishi 2013 Outlander Скачать руководство пользователя страница 124 | Manualshive

Страница: 124 / 602

Mitsubishi 2013 Outlander Скачать руководство пользователя страница 124

Features and controls

3-27

3

Starting the engine

Your vehicle is equipped with an electronically controlled fuel

injection system. This is a system that automatically controls
fuel injection. There is usually no need to depress the accelera-

tor pedal when starting the engine.

To prevent battery drain, wait a few seconds between attempts
to restart the engine.

1. Make sure all occupants are properly seated with seat

belts fastened.

2. Make sure the parking brake is applied.
3. Press and hold the brake pedal down with your right foot.
4. Press and hold the clutch pedal all the way down (manual

transaxle).

5. On vehicles equipped with manual transaxle, place the

gearshift lever in the “N” (Neutral) position.

On vehicles equipped with continuously variable trans-
mission (CVT), make sure the selector lever is in the “P”

(PARK) position.

NOTE

●

On vehicles equipped with continuously variable trans-
mission (CVT), the engine can only be started when the

selector lever is in the “P” (PARK) or “N” (NEUTRAL)

position.
For safety reasons, the engine should be started when the

selector lever is in the “P” (PARK) position in which the

driving wheels lock.

6. Press the engine switch.
7. Confirm that all warning lights and warning displays are

functioning properly.

NOTE

●

Minor noises may be heard on engine start-up. These will

disappear as the engine warms up.

When the engine is hard to start

After several attempts, you may experience that the engine still

does not start.

1. Make sure that all electric devices, such as lights, air con-

ditioning blower and rear window defogger, are turned
off.

2. While depressing the brake pedal {continuously variable

transmission (CVT)} or the clutch pedal (manual tran-
saxle), press the accelerator pedal halfway and hold it

there, then crank the engine. Release the accelerator

pedal, immediately after the engine starts.

3. If the engine still will not start, the engine could be

flooded with too much gasoline. While depressing the
brake pedal (CVT) or the clutch pedal (manual transaxle),

push the accelerator pedal all the way down and hold it

there, then press the engine switch to crank the engine. If
the engine does not start after 5 to 6 seconds, push the

engine switch to stop cranking the engine, and release the

accelerator pedal. Put the operation mode in OFF. Wait a
few seconds, and then press the engine switch to crank the

engine again while depressing the brake pedal (CVT) or

the clutch pedal (manual transaxle), but do not push the
accelerator pedal. If the engine fails to start, repeat these

procedures. If the engine still will not start, contact your

local Mitsubishi Motors dealer or a repair facility of your
choice for assistance.

SC00000500-3.fm 27

ページ

２０１２年３月２７日　火曜日　午前９時４２分

«
...
122
123
124
125
126
...
»

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов