Mitsubishi 2013 Outlander Скачать руководство пользователя страница 47

Страница: 47 / 602

2-20

Seat and restraint systems

1. Occupants should always sit back in their seats with their

backs against the upright seatback. To reduce the risk of
serious injury or death during deployment of the airbag,

adjust the driver’s seat as far back as possible while main-
taining a position that still enables you to fully apply the

pedals, easily control the steering wheel, and safely oper-

ate the vehicle. The front passenger seat should also be
moved as far back as possible. Refer to “Supplemental

Restraint System (SRS) - airbag” on page 2-43. Also refer

to “To adjust the seat forward or backward” on page 2-5.

WARNING

●

To reduce the risk of serious injury or death in the

event of an accident or sudden stop, all seatbacks

should be kept in the upright position while the vehi-
cle is in motion.

Seat belt performance during an accident can be

adversely affected if the seatbacks are reclined. The
more a seatback is reclined, the more likely seat belt

performance will be adversely affected. If the seat

belt is not properly positioned against the body dur-
ing an accident, there is increased risk you will slide

under the belt and receive serious injury or death.

BK0150700US.book 20

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 47 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: