Mitsubishi 2013 Outlander Скачать руководство пользователя страница 446

Страница: 446 / 602

Comfort controls

5-77

To switch the display

N00763100023

You can display the track titles, artist names and album titles
recorded in the iPod.

The display changes as follows every time the DISP button is

pressed during playback.
Album title

→

Track name

→

Artist name

→

Normal display

NOTE

●

Up to 10 characters are shown in the display at once. If the

title is cut off in the middle, press the PAGE button. The
next characters are displayed every time this button is

pressed.

●

If no title is stored, “NO TITLE” is shown in the display.

●

Characters that cannot be displayed are substituted

by “ • ”.

To play iPod tracks via voice operation (vehicles
with Bluetooth

2.0 interface)

N00763200024

Desired tracks can be selected and played from your iPod by

“Artist”, “Album”, “Playlist” and “Genre” using voice com-
mands.

For information concerning the voice recognition function or
speaker registration function, refer to “Bluetooth

2.0 inter-

face” on page 3-205.

The following explains how to prepare for voice operation and
play the tracks.

Preparation for voice operation

N00763300038

To use the voice operation, press the SPEECH button (1) first.

Album title

Track name

Artist name

Example

BK0150700US.book 77

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 446 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: