Mitsubishi 2013 Outlander Скачать руководство пользователя страница 388

Страница: 388 / 602

Comfort controls

5-19

Personalizing the air selection (Changing the function

setting)

N00702100044

You can change the following functions to match your prefer-
ence.

●

Enable automatic air control:

When the air conditioning operates, the air selection

switch will be automatically controlled.

●

Disable automatic air control:

Even when the air conditioning operates, the air selection

switch will not be automatically controlled.

●

Changing the settings
Press the air selection switch for about 10 seconds or

longer.

When the setting has changed, the system will beep and
the indicator light will flash.

• When the setting has changed from enabled to disabled,

the system will beep three times and the indicator will
flash three times.

• When the setting has changed from disabled to enabled,

the system will beep two times and the indicator light
will flash three times.

NOTE

●

The factory setting is “Enable automatic air control”.

●

While the mode selection dial is set to the “

” position,

the air selection will automatically change to the outside
air position, even if the system is set to “Disable auto-

matic air control”, in order to prevent windows from fog-

ging up.

Air conditioning switch

N00731000364

Push the switch, and the air conditioning compressor will turn
on. The air conditioning indicator light (A) will come on.

A sound will be made every time you push the switch.

Push the switch again and the air conditioning compressor will
stop and the indicator light (A) goes off.

CAUTION

●

Using the air conditioning slightly increases the

engine idle speed. Therefore, make sure your foot is
firmly on the brake pedal when shifting the tran-

saxle into drive.

BK0150700US.book 19

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 388 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: