Mitsubishi 2013 Outlander Скачать руководство пользователя страница 481

Страница: 481 / 602

6-6

For emergencies

5. If you do not see steam or spray coming from under the

hood, leave the engine on until the bar graph for the
engine coolant temperature warning display on the multi-

information display goes down. When it is in the middle
of the normal zone, you can start driving again. If the bar

graph stays in the red zone, turn off the engine.

6. When you do not see any more steam or spray, open the

hood. Look for obvious leaks, such as a split radiator

hose. Be careful as components will be hot. Any leak

source must be repaired.

7. If there is no obvious leak source, check the coolant level

in the engine coolant reserve tank. If there is none, or if it
is too low, slowly add coolant.

8. If the engine coolant reserve tank needs coolant, you will

probably also need to add coolant to the radiator. Do not
loosen or remove the radiator cap until the engine has

cooled down.

9. Start the engine, and slowly add coolant, up to the bottom

of the filler neck. Use plain water if you have to (and

replace it with the right coolant as soon as possible).

10. Replace the radiator cap and tighten it fully. Check the

engine coolant temperature display on the multi-informa-
tion display. You can start driving again when the bar

graph for the engine coolant temperature display returns

to the normal zone.

11. Have the system inspected by your authorized Mitsubishi

Motors dealer or a repair facility of your choice.

WARNING

●

Before raising the engine hood, check to see if there
is steam or spray coming from under the hood.

Steam or spray coming from an overheated engine

could seriously scald you.
Do not open the hood until there is no steam or

spray.

WARNING

●

Removing the radiator cap could scald you with

escaping hot water or steam. When checking the

radiator level, cover the cap with a cloth before try-
ing to remove it. Turn it slowly counterclockwise,

without pressing down, to the first notch. The pres-

sure in the system will then be let out. When the
pressure is COMPLETELY LET OUT, press down

and keep turning the cap counterclockwise until it

comes off.

BK0150700US.book 6

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 481 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: