Mitsubishi 2013 Outlander Скачать руководство пользователя страница 117

Страница: 117 / 602

3-20

Features and controls

To unlock

While carrying the F.A.S.T.-key within the operating range,

you can unlock the doors and the liftgate by using the F.A.S.T.-
key.

The dome light will turn on for 30 seconds. The turn signal

lights will blink twice and the buzzer will sound twice.

Also refer to “Door locks”, “Power door locks” and “Liftgate”
on pages 3-38, 3-41 and 3-44 respectively.

Press the driver’s door lock/unlock switch (A) to unlock only

the driver’s door.
Within about 2 seconds, press the driver’s door lock/unlock

switch one more time to unlock all the doors and the liftgate.

NOTE

●

Settings can be changed so that all doors and the liftgate

are unlocked automatically by pressing the driver’s door
lock/unlock switch once.

Refer to “Setting of door and liftgate unlock function” on

page 3-35.

Press the front passenger’s door lock/unlock switch (B) or the
liftgate OPEN switch (C) to unlock all the doors and the lift-

gate.

Driver’s door lock/unlock switch

Front passenger’s door lock/unlock switch

BK0150700US.book 20

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 117 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: