Mitsubishi 2013 Outlander Скачать руководство пользователя страница 234

Страница: 234 / 602

Features and controls

3-137

Service reminder

When the time for periodic inspection arrives, the warning dis-

play is displayed for a few seconds after the screen that is ini-
tially displayed when the ignition switch is turned “ON” or the

operation mode is changed to ON.

Refer to “Service reminder” on page 3-145.
Type 1

Type 2

Drive mode indicator display screen

(if so equipped)

N00555900020

Shows the 4WD drive status.

Refer to “Drive mode-selector” on page 3-84.

Warning display screen (With ignition switch

or operation mode in ON)

N00555200182

This is displayed when you press the multi-information meter
switch and switch the warning display screen.

This mark is also displayed if there is another warning other

than the one displayed.
When the cause of the warning display is eliminated, the
warning goes out automatically.

NOTE

●

When the warning is displayed, the warning display
screen can be redisplayed on the information screen.

Refer to “Information screen (With ignition switch or

operation mode in OFF)” on page 3-131.
Refer to “Information screen (With ignition switch or

operation mode in ON)” on page 3-138.

“Active stability control (ASC) OFF” display

screen

(if so equipped)

N00556100117

This is displayed when the Active stability control (ASC) is

turned “OFF” with the “ASC OFF” switch.
Also, if an abnormal condition is occurred in the ASC while

driving, the “ASC OFF” display illuminates.
Refer to “ASC OFF switch” on page 3-104.

BK0150700US.book 137

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 234 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: