Mitsubishi 2013 Outlander Скачать руководство пользователя страница 310

Страница: 310 / 602

Features and controls

3-213

Connecting the Bluetooth

2.0 interface and

Bluetooth

device

N00565000170

Before you can make or receive hands-free calls or play music
using the Bluetooth

2.0 interface function, you must pair the

Bluetooth

device and Bluetooth

2.0 interface.

NOTE

●

Pairing is required only when the device is used for the
first time. Once the device has been paired with the Blue-
tooth

2.0 interface, all you need is to bring the device

into the vehicle next time and the device will connect to
the Bluetooth

2.0 interface automatically (if supported

by the device). The device must have Bluetooth

turned

ON to connect.

Up to 7 Bluetooth

devices can be paired with the Bluetooth

2.0 interface.
If multiple paired Bluetooth

devices are available in the vehi-

cle, the cellular phone or music player most recently connected
is automatically connected to the Bluetooth

2.0 interface.

You can also change a Bluetooth

device to be connected.

To pair

To pair a Bluetooth

device with the Bluetooth

2.0 interface,

follow the steps below.

1. Stop your vehicle in a safe area, put the gearshift lever in

the “N” (Neutral) position (manual transaxle), or the
selector lever in the “P” (PARK) position (continuously

variable transmission (CVT)), and pull the parking brake

lever.

NOTE

●

You cannot pair any Bluetooth

device with the Blue-

tooth

2.0 interface unless the vehicle is parked. Before

pairing a Bluetooth

device with the Bluetooth

2.0 inter-

face, confirm that the vehicle is parked in a safe location.

2. Press the SPEECH button.
3. Say “Setup.”
4. Say “Pairing Options.”

BK0150700US.book 213

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 310 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: