Mitsubishi 2013 Outlander Скачать руководство пользователя страница 487

Страница: 487 / 602

6-12

For emergencies

2. Place the jack under one of the jacking points (A) shown

in the illustration. Use the jacking point closest to the tire
you wish to change.

NOTE

●

Put the spare wheel under the vehicle body near the jack.

This makes it safer if the jack slips out of position.

WARNING

●

Set the jack only at the positions shown here. If the

jack is set at a wrong position, it could dent your

vehicle or the jack might fall over and cause per-
sonal injury.

●

Do not use the jack on a tilted or soft surface.

Otherwise, the jack might slip and cause personal
injury. Always use the jack on a flat, hard surface.

Before setting the jack, make sure there are no sand

or pebbles under the jack base.

BK0150700US.book 12

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 487 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: