Mitsubishi 2013 Outlander Скачать руководство пользователя страница 187

Страница: 187 / 602

3-90

Features and controls

Driving through water

N00537800098

If the electrical circuits become wet, further operation of the

vehicle will be impossible; therefore, avoid driving through
water unless absolutely necessary. If driving through water is

unavoidable, use the following procedure:

Check the depth of the water and the terrain before attempting

to drive through it. Drive slowly to avoid creating excessive
water splashing.

Inspection and maintenance following

rough road operation

N00530700098

After operating the vehicle in rough road conditions, be sure to
perform the following inspection and maintenance procedures:

●

Check that the vehicle has not been damaged by rocks,

gravel, etc.

●

Carefully wash the vehicle with water.

Drive the vehicle slowly while lightly depressing the

brake pedal in order to dry out the brakes. If the brakes
still do not function properly, contact an authorized

Mitsubishi Motors dealer or a repair facility of your

choice as soon as possible to have the brakes checked.

●

Remove the insects, dried grass, etc. clogging the radiator

core.

●

After driving through water, check the engine, transaxle
and differential oil. If the oil or grease is milky or cloudy

because of water contamination, it must be replaced with

new oil.

●

Check the inside of the vehicle. If water entry is found,

dry the carpet etc.

●

Inspect the headlights. If water is in the headlight housing,
have it drained at an authorized Mitsubishi Motors dealer

or a repair facility of your choice.

●

Have an authorized Mitsubishi Motors dealer replace
grease in the wheel bearings.

CAUTION

●

Never drive through water that is deep enough to

cover wheel hubs, axles or exhaust pipe. Do not

change the gearshift lever position (M/T) or the
selector lever position (CVT) while driving through

water.

Frequent driving through water can adversely affect
the life span of the vehicle; consult an authorized

Mitsubishi Motors dealer or a repair facility of your

choice and take the necessary measures to prepare,
inspect, and repair the vehicle.

●

After driving through water, apply the brakes to be

sure they are functioning properly. If the brakes are
wet and not functioning properly, dry them out by

driving slowly while lightly depressing the brake

pedal. Inspect each part of the vehicle carefully.

BK0150700US.book 90

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 187 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: