Mitsubishi 2013 Outlander Скачать руководство пользователя страница 401

Страница: 401 / 602

5-32

Comfort controls

Operating the air conditioning system (automatic

mode)

N00731700260

In normal conditions, use the system in the AUTO mode and

follow these procedures:

1. Set the blower speed selection dial to the “AUTO” posi-

tion.

2. Select the temperature control dial to the desired tempera-

ture. The temperature can be set within a range of around

61 to 89. The temperature will increase as the dial is
turned to the right.

3. Set the mode selection dial to the “AUTO” position.

The vents (except between “

” and “

”), recirculation/out-

side air, blower speed, and ON/OFF of air conditioning will be

controlled automatically.

NOTE

●

Set the temperature at about 75 under normal conditions.

●

While the engine coolant temperature is low, the tempera-
ture of the air from the heater will be cool/cold until the

engine warms up, even if you have selected warm air with

the dial. To prevent the windshield and windows from
fogging up, the vent mode will be changed to “

” or

“

” and the blower speed will be reduced.

BK0150700US.book 32

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 401 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: