Mitsubishi 2013 Outlander Скачать руководство пользователя страница 458

Страница: 458 / 602

Comfort controls

5-89

To listen to tracks from a device connected via
Bluetooth

N00765500047

1. Press the PWR button to turn on the audio system. The

system turns on in the last mode used.

2. Press the CD button several times to switch to the

B (Bluetooth

) mode. The input mode changes as follows

every time the CD button is pressed.
CD mode

→

USB (iPod) mode

→

Bluetooth

mode

NOTE

●

For vehicles equipped with audio input RCA terminals,
pressing and holding the CD button for 2 seconds or more

switches the system to the AUX mode.

3. Connect your Bluetooth

device.

Refer to “Connecting the Bluetooth

2.0 interface and

Bluetooth

device” on page 3-213.

4. Playback starts automatically.

NOTE

●

Depending on the connected device, the playback may not

start automatically.
In this case, operate the connected device to start the play-

back.

To stop the playback (if supported by the device)

N00765600022

To stop the playback, press the DISC DOWN button.

To restart the playback, press the DISC UP button.

To pause the playback (if supported by the device)

N00765700023

To pause the playback, press the DISC DOWN button.
To restart the playback, press the DISC UP button.

To select a track (if supported by the device)

N00765800024

Press the TRACK button to select the desired track number.

If the

side of the button is pressed once while a track is

playing, playback returns to the start of that track.

NOTE

●

Every time the track selection button is pressed, the track
number in the display changes.

To play the same track repeatedly (if supported by the

device)

N00765900025

Press the RPT button during playback to show “RPT” in the
display.

To exit this mode, press the button again.

Press

: The track number increases by one.

Press

: The track number decreases by one.

Press

for a long

period (approx. 2
seconds or more)

: The track number increases continu-

ously while the button is pressed.

Press

for a long

period (approx. 2
seconds or more)

: The track number decreases continu-

ously while the button is pressed.

BK0150700US.book 89

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 458 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: