Mitsubishi 2013 Outlander Скачать руководство пользователя страница 508

Страница: 508 / 602

Vehicle care and maintenance

7-7

Engine oil and oil filter

N00937700929

To check and refill engine oil

It is normal for an engine to use oil. You may need to add oil
between the recommended oil change intervals. Before starting

the engine, check the engine oil level. Refill if necessary.

To check the oil level, remove the dipstick, wipe it off, and

gently reinsert it all the way. Slowly pull the dipstick straight
out and check the oil level by checking the upper surface of the

dipstick. The oil level must not go above the line on the dip-

stick.

NOTE

●

If it is difficult to verify the oil level, wipe off the dipstick

and reinsert it. Wait a moment and then recheck the oil

level by checking the upper surface of the dipstick.

If the level does not reach the line which shows the smallest

amount of oil required, remove the oil filler cap on the engine

valve cover, and fill to within the “Good” range.

CAUTION

●

Overfilling will cause oil aeration and loss of oil

pressure, which could damage the engine.

WARNING

●

Used engine oil is poisonous, and can damage your

skin. Prolonged and repeated contact may cause

serious skin disorders, including dermatitis and can-
cer. Do not let used oil touch your skin and wash

thoroughly after working with it.

●

Keep used oil out of the reach of children.

Good

BK0150700US.book 7

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 508 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: