Mitsubishi 2013 Outlander Скачать руководство пользователя страница 210

Страница: 210 / 602

Features and controls

3-113

To deactivate

N00518800549

The set speed driving can be deactivated as follows:

●

Press the “ON OFF” switch (A). (Cruise control will be
turned off.)

●

Press the “CANCEL” switch (D).

●

Depress the brake pedal.

The set speed driving is deactivated automatically in any of the

following ways.

●

When you depress the clutch pedal (on vehicles equipped
with manual transaxle).

●

When your speed slows to about 10 mph (15 km/h) or

more below the set speed because of a hill, etc.

●

When your speed slows to about 25 mph (40 km/h) or

less.

●

When the active stability control (ASC) starts operating.
Refer to “Active stability control (ASC)” on page 3-102.

Also, the set speed driving may be deactivated as follow:

●

When the engine speed rises and approaches the tachome-

ter’s red zone (the red-colored part of the tachometer dial).

WARNING

●

On vehicles equipped with continuously variable

transmission (CVT), although the set speed driving
will be deactivated when shifting to the “N” (NEU-

TRAL) position, never move the selector lever to the

“N” (NEUTRAL) position while driving.
You would have no engine braking and could cause

a serious accident.

CAUTION

●

When the set speed driving is deactivated automati-

cally in any situation other than those listed above,
there may be a system malfunction.

Press the “ON OFF” switch to turn off the cruise

control and have your vehicle inspected by an autho-
rized Mitsubishi Motors dealer or a repair facility of

your choice.

BK0150700US.book 113

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 210 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: