Mitsubishi 2013 Outlander Скачать руководство пользователя страница 278

Страница: 278 / 602

Features and controls

3-181

Charging system warning display

N00558600103

Type 1

Type 2

If there is a fault in the charging system, the warning display
warning is displayed on the information screen in the multi-

information display. The warning light in the instrument cluster
also illuminates.

●

If the brake warning display, brake warning light,
and the Anti-lock braking system warning light are

illuminated at the same time, the braking force dis-

tribution function will not operate, so the vehicle
may be destabilized during sudden braking. Avoid

sudden braking and high-speed driving. Park the

vehicle in a safe place, and contact an authorized
Mitsubishi Motors dealer or a repair facility of your

choice.

●

The vehicle should be brought to a halt in the follow-
ing manner when brake performance is deterio-

rated.

• Confirm that the vehicle slows down when you

press down on the brake pedal harder than usual.

In some cases, the brake pedal may go all the way

to the floor.

• Should the brakes fail, use engine braking to

reduce your speed and slowly apply the parking

brake.
Depress the brake pedal to illuminate the stop

lights to alert the vehicles behind you.

CAUTION

●

If warnings are displayed while the engine is run-
ning, park your vehicle in a safe place as soon as

possible and contact an authorized Mitsubishi

Motors dealer or a repair facility of your choice to
have the system checked.

BK0150700US.book 181

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 278 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: