manualshive.com logo in svg

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 228 / 602

Поделиться
Скачать
Mitsubishi 2013 Outlander Скачать руководство пользователя страница 228

Features and controls

3-131

3

Multi-information meter switch

N00555100149

The multi-information meter switch is a button marked

“INFO” on the left side of the dash.
Each time the multi-information meter switch is operated, a

sound is emitted and the multi-information display changes

between information such as warnings, Odometer (Type1), trip
odometer, service reminder, engine coolant temperature (Type

1), average and momentary fuel consumption, driving range,

and average speed.
It is also possible to change elements such as the language and

units used on the multi-information display by operating the

multi-information meter switch.

 Warning display screen (With ignition switch 

or operation mode in OFF)

N00555200179

If you press the multi-information meter switch and return
from the warning display screen to the previous screen, the 
warning is displayed.
Refer to “Returning to the display screen from before the warn-

ing display” on page 3-134.

This mark is also displayed if there is another warning other
than the one displayed. When the cause of the warning display
is eliminated, the   warning goes out automatically.

NOTE

●

When the   warning is displayed, the warning display
screen can be redisplayed on the information screen.

Refer to “Information screen (With ignition switch or

operation mode in OFF)” on page 3-131.
Refer to “Information screen (With ignition switch or

operation mode in ON)” on page 3-138.

Information screen (With ignition switch or oper-

ation mode in OFF)

N00555300167

Each time you lightly press the multi-information meter

switch, the display screen switches in the following order.

BK0150700US.book  131 

ページ

  

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов