Mitsubishi 2013 Outlander Скачать руководство пользователя страница 183

Страница: 183 / 602

3-86

Features and controls

CAUTION

●

If the selected drive mode indicator is blinking, the

vehicle switches automatically to front-wheel drive
in order to protect the drive-system components,

and drive mode selection is no longer possible with

the drive mode-selector.
The warning display is also displayed in the infor-

mation screen in the multi-information display.

Reduce speed, and if the indicator goes out after
driving a while, resume driving as before. If the indi-

cator continues blinking for more than about 5 min-

utes, have the vehicle inspected at an authorized
Mitsubishi Motors dealer or a repair facility of your

choice as soon as possible.

Type 1

Type 2

CAUTION

●

The warning display on the information screen in

the multi-information display, a problem has
occurred with the electronically controlled 4WD sys-

tem and the safety device has activated. Have an

inspection made by an authorized Mitsubishi
Motors dealer or a repair facility of your choice as

soon as possible.

Type 1

Type 2

CAUTION

●

Always use tires of the same size, type, and brand

that have no wear differences. Using tires that differ
in size, type, brand, or wear amount may activate

the protection of the drive-system components, caus-

ing the drive mode in “4WD AUTO” mode to lock or
the “4WD” and “LOCK” indicators to blink alter-

nately.

BK0150700US.book 86

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 183 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: