Mitsubishi 2013 Outlander Скачать руководство пользователя страница 131

Страница: 131 / 602

3-34

Features and controls

To lock

Press the LOCK button (1) to lock all the doors and the liftgate.

The turn signal lights will also blink once.

NOTE

●

If you press the LOCK button (1) twice, the horn will

sound once.

To unlock

Press the UNLOCK button (2) to unlock the driver’s door only.
Within about 2 seconds, press the UNLOCK button one more

time to unlock all the doors and liftgate.

The dome light will turn on for 30 seconds. The turn signal
lights will also blink twice.

The front side-marker and parking lights will also turn on for

about 30 seconds. Refer to “Welcome light” on page 3-189.

NOTE

●

On a vehicle equipped with a Mitsubishi Multi-Communi-

cation System, the functions can be adjusted on the

screen. For details, refer to the separate operation manual.

●

The door and liftgate unlock function can be set so that all

doors and liftgate unlock when the UNLOCK button (2) is

pressed once.
Refer to “Setting of door and liftgate unlock function” on

page 3-35.

Answerback function

The horn and turn signal lights of the keyless entry system

answerback function can be changed as required. This is done
with the key removed from the ignition switch.

Horn deactivation/reactivation

The answerback function can be set in the following three
ways.

1. Put the operation mode in OFF.
2. Open the driver’s door and turn the combination head-

lights and dimmer switch to the “OFF” position.

3. Press the LOCK button (1) for 4 to 10 seconds and press

the UNLOCK button (2) during this time.

4. Release in sequence the UNLOCK and LOCK buttons

within 10 seconds of pressing the UNLOCK button in step

NOTE

●

On a vehicle equipped with a Mitsubishi Multi-Communi-

cation System, the functions can be adjusted on the

screen. For details, refer to the separate operation manual.

One chime:

The horn will not sound.

Two chimes:

The horn will sound.

Four chimes:

The horn will sound if the LOCK button is
pressed twice within 1 second.

BK0150700US.book 34

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 131 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: