Mitsubishi 2013 Outlander Скачать руководство пользователя страница 194

Страница: 194 / 602

Features and controls

3-97

NOTE

●

Once the brake assist system is operational, it maintains

great braking force even if the brake pedal is lightly
released.

To stop its operation, completely remove your foot from

the brake pedal.

●

The brake assist system may become operational when the

brake pedal is fully depressed even if it has not been

depressed suddenly.

●

When the brake assist system is in use while driving, you

may feel as if the depressed brake pedal is soft, the pedal

moves in small motions in conjunction with the operation
noise, or the vehicle body and the steering wheel vibrate.

This occurs when the brake assist system is operating nor-

mally and does not indicate faulty operation. Continue to
depress the brake pedal.

●

You may hear an operation noise when the brake pedal is

suddenly or fully depressed while stationary. This does
not indicate a malfunction and the brake assist system is

operating normally.

Anti-lock braking system

N00517900240

The anti-lock braking system helps prevent the wheels from
locking up when braking. This helps maintain vehicle drivabil-

ity and steering wheel handling.

Driving hints

●

When using the anti-lock brakes (sudden braking), steer-

ing is slightly different from normal driving conditions.
Use the steering wheel carefully.

●

Always keep a safe distance from the vehicle in front of

you. Even if your vehicle is equipped with the anti-lock
braking system, leave a greater braking distance when:

• Driving on gravel or snow-covered roads.

• Driving on uneven road surfaces.

●

Operation of anti-lock braking system is not restricted sit-

uations where brakes are applied suddenly. This system

may also prevent the wheels from locking when you drive
over manholes, steel roadwork plates, road markings, or

any uneven road surface.

●

When the anti-lock braking system is in use, you may feel
the brake pedal vibrating and hear a unique sound. It may

also feel as if the pedal resists being pressed.

In this situation, simply hold the brake pedal down

firmly. Do not pump the brake, which will result in

reduced braking performance.

BK0150700US.book 97

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 194 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: