Mitsubishi 2013 Outlander Скачать руководство пользователя страница 32

Страница: 32 / 602

Seat and restraint systems

2-5

To adjust the seat forward or backward

N00401900228

Manual seat adjustment

Pull the seat adjusting lever up and slide the seat forward or
backward to the desired position. Release the adjusting lever to

lock the seat in place.

Power seat adjustment

Operate the switch forward or backward to move the seat to the

desired position. Release the switch to lock the seat in place.

NOTE

●

To prevent the battery from going dead, operate the power

seat with the engine running.

WARNING

●

To make sure that the seat is securely locked, try to

move it forward or backward without using the
adjusting lever.

Forward (toward the front of the vehicle)

Backward (toward the rear of the vehicle)

BK0150700US.book 5

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 32 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: