Mitsubishi 2013 Outlander Скачать руководство пользователя страница 248

Страница: 248 / 602

Features and controls

3-151

Manual reset mode

●

If you press and hold the multi-information meter switch
when the average fuel consumption and average speed are

displayed, these calculations will be reset to zero.

●

When the following operation is performed, the mode set-
ting changes automatically from manual to auto.

[Except for vehicles equipped with the F.A.S.T.-key]

Turn the ignition switch to the “ON” position from the

“ACC” or “OFF” position.

[For vehicles equipped with the F.A.S.T.-key]

Change the operation mode to ON from ACC or OFF.

Auto reset mode

●

When the average fuel consumption and average speed

are being displayed, if you hold down the multi-informa-

tion meter switch, these calculations will be reset to zero.

●

When the engine switch or the operation mode is in the

following conditions, the average fuel consumption dis-

play and the average speed display will automatically
reset.

[Except for vehicles equipped with the F.A.S.T.-key]

The ignition switch has been set to the “ACC” or “OFF”

position for about 4 hours or more.

[For vehicles equipped with the F.A.S.T.-key]
The operation mode has been in ACC or OFF for about 4

hours or more.

NOTE

●

Disconnecting the battery cable will erase from memory

the manual reset mode or auto reset mode setting for the
average speed display and average fuel consumption dis-

play.

●

The initial (default) setting is “Auto reset mode”.

Changing the fuel consumption display unit

N00557100143

The fuel consumption display unit can be changed. The dis-

tance, speed, and amount units are also changed to match the
selected fuel consumption unit.

1. Press and hold the multi-information meter switch (for

about 2 seconds or more) to change from the setting mode

screen to the menu screen.

Refer to “Changing the function settings (With ignition
switch or operation mode is in ON)” on page 3-148.

BK0150700US.book 151

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 248 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: