manualshive.com logo in svg

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 169 / 602

Поделиться
Скачать
Mitsubishi 2013 Outlander Скачать руководство пользователя страница 169

3-72

Features and controls

3

NOTE

●

If it is hard to shift into 1st, depress the clutch pedal a sec-

ond time; the shift will then be easier.

●

To shift into reverse from 5th gear, move the gearshift
lever to the “N” (Neutral) position, and then shift it into

reverse.

●

The gearshift indicator shows recommended gearshift
points for fuel-efficient driving. It shows a “ ” when an
upshift is recommended, and it shows a “ ” when a
downshift is recommended.

Proper shift points

N00537400052

Always use care to change the gear with the vehicle speed

matched to the engine speed. Proper shifting will improve fuel
economy and prolong engine life.

CAUTION

!

●

Do not move the gearshift lever into reverse while

the vehicle is moving forward; doing so will damage
the transaxle.

●

Do not rest your foot on the clutch pedal because

this will cause premature clutch wear or damage.

●

Do not coast in the “N” (Neutral) position (illegal in

many states).

●

Do not use the gearshift lever as a handrest, because
this can result in premature wear of the transaxle

shift forks.

CAUTION

!

●

Avoid downshifting that may cause the tachometer

pointer to enter the red zone.

This puts the engine at risk of being damaged.

BK0150700US.book  72 

ページ

  

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов