Mitsubishi 2013 Outlander Скачать руководство пользователя страница 48

Страница: 48 / 602

Seat and restraint systems

2-21

2. Before using the rear center seat belt, make sure that the

detachable anchor is securely latched and the seat belt is
not twisted. For details, refer to page 2-23.

3. Grasp the latch plate and slide it up the webbing so that it

easily pulls across your body.

4. Pull the seat belt out slowly while holding the latch plate.

Push the latch plate into the buckle until you hear a
“click”. Pull up on the belt to be sure the latch plate is

locked securely in the buckle.

NOTE

●

If the seat belt locks up and cannot be pulled out, pull it

once with force and let it retract all the way.

Then, pull the belt out slowly once again.

BK0150700US.book 21

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 48 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: