Mitsubishi 2013 Outlander Скачать руководство пользователя страница 119

Страница: 119 / 602

3-22

Features and controls

Engine switch

N00513500075

To prevent vehicle theft, no F.A.S.T.-keys other than those reg-

istered in advance can be used to start the engine. (Electronic
immobilizer function)

While carrying the F.A.S.T.-key, the engine switch can be used

to start the engine.

NOTE

●

When operating the engine switch, press the switch all the

way in. If the switch is not fully pressed, the engine may

not start or the operation mode may not change. If the
engine switch is pressed correctly, there is no need to hold

the engine switch down.

Operation mode of the engine switch and its function

OFF

The indicator light on the engine switch turns off.

On vehicles equipped with continuously variable transmission

(CVT), the operation mode cannot be put in OFF when the
selector lever is in any position other than the “P” (PARK)

position.

ACC

Allows operation of electrical accessories.

The indicator light on the engine switch illuminates orange.

All electrical accessories can be used.

The indicator light on the engine switch illuminates green.

The indicator light turns off when the engine is running.

CAUTION

●

The indicator light (A) will flash orange when there

is a problem or malfunction in Free-hand Advanced

Security Transmitter. Never drive if the indicator
light on the engine switch is flashing orange. Imme-

diately contact your authorized Mitsubishi Motors

dealer.

CAUTION

●

If the engine switch operation is not smooth and

feels like it is sticking, do not operate the switch.
Immediately contact an authorized Mitsubishi

Motors dealer.

BK0150700US.book 22

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 119 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: