Mitsubishi 2013 Outlander Скачать руководство пользователя страница 126

Страница: 126 / 602

Features and controls

3-29

NOTE

●

Do not insert into the key slot anything other than the

F.A.S.T.-key. This could cause damage or a malfunction.

●

Remove the object or additional key from the F.A.S.T.-
key before inserting the key into the key slot. The vehicle

may not be able to receive the registered ID code from the

registered key. Therefore, the engine may not start and the
operation mode may not change.

F.A.S.T.-key reminder

If the operation mode is in OFF and the driver’s door is opened

with the F.A.S.T.-key in the key slot, a warning is issued with

the warning display and the buzzer buzzing for approximately

3 seconds to remind you to remove the key.

BK0150700US.book 29

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 126 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: