Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 311 / 602

3-214
Features and controls
3
5. The voice guide will say “Select one of the following:
pair, edit, delete, or list.” Say “Pair.”
NOTE
●
If 7 devices have already been paired, the voice guide will
say “Maximum devices paired” and then the system will
end the pairing process. To register a new device, delete
one device and then repeat the pairing process.
(Refer to “Selecting a device: Deleting a device” on page
3-215.)
6. The voice guide will say “Please say a 4-digit pairing
code.” Say a 4-digit number.
When the confirmation function is on, the system will
confirm whether the number said is acceptable. Answer
“Yes.”
Answer “No” to return to pairing code selection.
NOTE
●
Some Bluetooth
®
devices require a specific pairing code.
Please refer to the device manual for pairing code require-
ments.
●
The pairing code entered here is only used for the Blue-
tooth
®
connection certification. It is any 4-digit number
the user would like to select.
Remember the pairing code as it needs to be keyed into
the Bluetooth
®
device later in the pairing process.
Depending on the connection settings of the Bluetooth
®
device, this code may have to be entered each time you
connect the Bluetooth
®
device to the Bluetooth
®
2.0
interface. For the default connection settings, refer to the
instructions for the device.
7. The voice guide will say “Start pairing procedure on the
device. See the device manual for instructions.” Enter in
the Bluetooth
®
device the 4-digit number you have regis-
tered in Step 6.
NOTE
●
Depending on the Bluetooth
®
device, it may take a few
minutes to pair it with the Bluetooth
®
2.0 interface.
●
If the Bluetooth
®
2.0 interface cannot recognize the Blue-
tooth
®
device, the voice guide will say “Pairing has timed
out” and the pairing process will be cancelled.
Confirm that the device you are pairing supports Blue-
tooth
®
, and try pairing it again.
●
If you enter the wrong number, the voice guide will say
“Pairing failed” and the pairing process will be cancelled.
Confirm the number is right, and try pairing it again.
8. The voice guide will say “Please say the name of the
device after the beep.” You can assign a desired name for
the Bluetooth
®
device and register it as a device tag. Say
the name you want to register after the beep.
NOTE
●
When the confirmation function is on, after repeating the
device tag you have said, the voice guide will ask “Is this
correct?” Answer “Yes.”
To change the device tag, answer “No” and then say the
device tag again.
9. The voice guide will say “Pairing complete,” after which
a beep will be played and the pairing process will end.
BK0150700US.book 214 ページ ２０１２年３月２２日 木曜日 午後６時４６分