Mitsubishi 2013 Outlander Скачать руководство пользователя страница 337

Страница: 337 / 602

3-240

Features and controls

Interior lights

N00525300562

NOTE

●

Be aware that leaving the light illuminated with the engine

off may run the battery down.

Never leave the vehicle without checking that the light is
off.

Dome light (front)/Reading lights

N00525400420

Dome light (front)

1- (DOOR)
The light illuminates when a door or the liftgate is opened.

It goes off approximately 30 seconds after the door or lift-

gate is closed.
However, the light goes off immediately in the following

cases:

• When the ignition switch is turned to the “ON” position

or the operation mode is put in ON.

• When the power door lock function is used to lock the

vehicle.

• When the remote control transmitter of the keyless entry

system or the F.A.S.T.-key is used to lock the vehicle.

1- Cargo room light

→

P.3-243

2- Dome light (Rear) (if so equipped)

→

P.3-242

3- Dome light (Front)/Reading lights

→

P.3-240

Sunshade illumination dimming control switch
(if so equipped)

→

P.3-244

BK0150700US.book 240

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 337 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: