Mitsubishi 2013 Outlander Скачать руководство пользователя страница 480 | Manualshive

Страница: 480 / 602

Mitsubishi 2013 Outlander Скачать руководство пользователя страница 480

For emergencies

6-5

6

As your vehicle has anti-lock brakes

If you drive your vehicle with a low battery charge after the

engine has been started by using jumper cables, the engine may

misfire. This can cause the anti-lock braking system warning
light to blink on and off. This is only due to the low battery

voltage. It is not a problem with the brake system. If this hap-

pens, fully charge the battery and ensure the charging system is
operating properly.

Engine overheating

N00836500352

When the engine is overheating, the information screen in the
multi-information display will be interrupted and the engine
coolant temperature warning display will appear. Also “ ”
blink. If this happens:

1. Stop the vehicle in a safe place. Turn on the hazard warn-

ing flashers.

2. With the engine still running, carefully raise the engine

hood to vent the engine compartment.

3. Check that the cooling fan is running. If the fan is not

turning, stop the engine immediately and contact an
authorized Mitsubishi Motors dealer or a repair facility of

your choice for assistance.

4. If you see steam or spray coming from under the hood,

turn off the engine.

WARNING

!

●

To avoid personal injury, keep hands, hair, jewelry
and clothes away from the cooling fan. The cooling

fan can start at any time.

BK0150700US.book 5

ページ

２０１２年３月２２日　木曜日　午後６時４６分

«
...
478
479
480
481
482
...
»

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов